1. Lokacin da aka lanƙwasa katako na polycarbonate, ya kamata ya bi jagorancin karfi kuma kada ya lankwasa a gefe.Radius na lanƙwasawa yakamata shine kauri na takardar: ƙasa da sau 175 don hukunce-hukuncen allo mai Layer biyu, ƙasa da sau 185 don allo mai Layer uku, kuma fiye da sau 200 don takaddar Layer huɗu ƙasa.Radius na lanƙwasawa na katako mai ƙarfi shima bai wuce 175 kauri ba.An haramta sosai don amfani da sukurori a sashin lanƙwasa na gyaran waya
2. A lokacin da installing m allon da m jimiri allon, da gidajen abinci tsakanin allon da allon dole ne a dogara ne a kan jirgin size inch tanadi thermal fadada rata, thermal fadada coefficient ne 0.065mm/m℃, tsananin haramta Kai tapping sukurori, ja. rivets, da dai sauransu kai tsaye
Daure ta cikin allo.Idan dole ne ku wuce ta, dole ne ku haƙa farantin da diamita ya fi girma fiye da dunƙulewa na kai ko rive diamita na ƙusa shine girman rami 100%, sa'an nan kuma ƙusa mai ɗaukar kansa ko rivet ya wuce ta tsakiyar tsakiyar fadada. rami don tabbatar da farantin za a iya da yardar kaina miƙa a kowane shugabanci na uku, da karfe tsarin kwarangwal dole ne a shigar da tabbaci, kiyaye daidaito, da kuma kauce wa carbon tara saboda skeleton.Lalacewar lalacewa ta hanyar acid ester takardar na huɗu, da frame abu na karfe tsarin. dole ne ya dace da yanki na tsarin don sauƙaƙe ginawa na biyar, ƙirar ƙirar aluminum ya dace da kauri da yanki na farantin da aka saya, wanda zai iya kare takardar tsawaita rayuwar sabis.
8. Lokacin shigar da katako na polycarbonate, dole ne jirgin ya sami V co-extruded UV kariya Layer tare da rubutu.
Gefen fim ɗin kariya na kalmar yana fuskantar waje, kuma ba dole ba ne a shigar da shi baya.Cire fim ɗin kariya nan da nan bayan shigarwa don guje wa mannewa fim ɗin kariya da allon polycarbonate bayan bayyanar rana.
9. Fim ɗin kariya game da 30mm daga gefen ya kamata a buɗe shi kafin shigar da katako na polycarbonate.An haramta shi sosai don danna fim ɗin kariya a ƙarƙashin bayanin martaba sannan kuma amfani da wuka don yanke fim ɗin kariya.Bai kamata a sami ɓarna a kowane ɓangare na takardar polycarbonate ba.
10. Sashin yanke na katako na polycarbonate an rufe shi da tef ɗin aluminum ko ruwa mai hana ruwa da kuma tef ɗin numfashi don hana tururi na ruwa, ƙura da kwari daga shiga cikin ɓarna, wanda ke rinjayar nuna gaskiya da kyan gani na takardar polycarbonate.
Sunan Kamfanin:Baoding Xinhai Plastic Sheet Co., Ltd
Abokin Tuntuɓa:Sale Manager
Imel: info@cnxhpcsheet.com
Waya:+ 8617713273609
Ƙasa:China
Yanar Gizo: https://www.xhplasticsheet.com/
Lokacin aikawa: Oktoba-27-2021